Operation, Controlling modules by unit codes – Radio Shack 61-2677C User Manual
Page 14
14
OPERATION
Operation of a Plug ’N Power system is simple, but be sure
that you have a complete chart of your system close by so
you know exactly what you are controlling. See the “Plug ’N
Power System Chart” on Page 24.
Note: Each switch on your controller performs two functions
—
ON
or
OFF
,
BRIGHT
or
DIM
, and so on. These functions
are clearly marked. Pressing the top of a rocker switch acti-
vates one function and pressing the bottom activates anoth-
er. When you press a button, the transmit indicator lights,
indicating that a signal has been sent.
CONTROLLING MODULES BY UNIT
CODES
You can control any module or group of modules that you
set for a particular unit code. Of course, all of the modules
must be set to the same house code as the controller. (See
“House Codes” on Page 5.)
61-2677CD.fm Page 14 Tuesday, July 6, 1999 11:05 AM