Rosewill RME-ULP01R - Manual (Page 3)

USB Turntable with built-in speaker RME-ULP01R User Manual
2
INITIAL STARTING-UP
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the
unit.
AMPLIFIER CONNECTION
Connect audio plugs to Alert input on your mixer or amplifier:
Red plug into R/H channel input.
White plug into L/H channel input.
Playing a record
- Remove dust cover from your turntable.
- Place the record of your choice on the turntable. If it is a 45 RPM, do not forget to place
the adapter on the record spindle.
- Choose the desired playing speed using the Speed select switch
between 33.3, 45 and 78RPM.
- Put down the power knob.
- Release the tonearm lock.
- Push in the arm with your hand lightly.
- Place the cartridge vertically over the first track of the record the turntable will start
turning automatically.
- Put down the cartridge slowly to the record then the turntable will play.
- When records comes to the end, platter will stop automatically if the Auto-stop switch
points to ON position.
When the switch locates to OFF it can help to read some long Recorded records.
NOTE:
- Lift up the tonearm and put it on the rest.
- Replace the protective cap on the stylus and close the tonearm lock.
- Turn off power at mains.
MAINTENANCE
REPLACING THE STYLUS
-Refer to the figures 1-8