Radio Shack 43-3910 - Manual (Page 3)

3
such as Call Waiting. For example, if you
have Call Waiting, press
FLASH to answer
an incoming call without disconnecting the
current call. Press
FLASH again to return to
the first call. Ô
U
SING
R
EDIAL
To redial the last number you called, pick up
the handset and press
REDIAL when you
hear a dial tone. The number scrolls across
the display, and the phone automatically
dials it.
Ô
U SING P AUSE
Some telephone systems require you to dial
an access code (9, for example) and wait for
a second dial tone before dialing an outside
number. When you manually dial a number,
you can have your telephone pause
anywhere during the dialing sequence.
Simply press
PAUSE at the desired location.
When you redial a number, the telephone
pauses for about four seconds at the pause
entry. For longer pauses, press
PAUSE
again.
CALLER ID
OPERATION
If you subscribe to a Caller ID service, the
phone automatically displays information
about calls you receive and stores the
information in Caller ID memory. The system
can store up to 99 incoming phone numbers
or 64 incoming phone numbers with names
into call records.
During an incoming call, the phone company
automatically sends the correct time
between the first and second rings to update
your system’s display.
R
EVIEWING
C
ALL
R
ECORDS
Repeatedly press UP or DOWN to review the
new calls. After all new calls have been
reviewed,
END OF NEW CALL appears.
To review all the records from oldest to
newest, repeatedly press
UP . To review the
records from newest to oldest, repeatedly
press
DOWN . After reviewing all records in
memory, END OF LIST appears.
• If an incorrect, invalid or incomplete
Caller ID signal is received, LINE ERROR
appears on the display.
• If the name and number are not
available due to the caller’s restriction,
PRIVATE CALL appears on the display.
• If the name and number are not
available, -UNAVAILABLE- appears on the
display.
• RPT appears with a number if you have
received a call from the same phone
number more than once.
• If you do not press a button within about
15 seconds, the system automatically
returns to the normal display.
C ALL B ACK FROM C ALLER ID
M EMORY
1. Press UP or DOWN to find the number to
redial.
2. Press CALL BACK twice. LIFT HANDSET or
PICK UP CALL appears.
3. Lift the handset, and the number is
redialed automatically. Ô
Follow these steps to select one of the
options for Caller ID call back.
1. Press UP or DOWN to find the Caller ID
memory location to be redialed.
2. Press CALL BACK . The 7- or 11-digit
number flashes.
3. Press UP or DOWN to select one of the
four options (1–4).
Option1
1 + Area Code + 7–digit number
(11 digits)
Option2
1+7–digit number (8 digits)
Option3
Area Code + 7–digit number (10 digits)
Option4
7–digit number
4. Press CALL BACK again to confirm.
5. Pick up the handset, and the selected
number is dialed automatically.
D
ELETING
C
ALL
R
ECORDS
You can select and delete an individual call
record, or all call records stored in the
system.
To delete a single call record, press UP or
DOWN until the call record you want to
delete appears. Press DELETE twice. The
call record is deleted, and the system
automatically renumbers the remaining call
records.
To delete all of the call records after all new
calls have been reviewed, hold down
DELETE for about three seconds. ERASE ALL
CALLS appears. Press DELETE . The system
deletes all call records. NO CALLS appears,
and then TOTAL : 00 NEW : 00 appears. Ф
Ф
NOTE
Ô
Using Flash
• If you do not have any special phone
services, pressing FLASH might disconnect
the current call.
• Pressing FLASH does not hang up the
system.
Using Redial
The redial memory holds up to 32 digits, so
you can redial long distance as well as local
phone numbers.
Call Back from Caller ID Memory
Your telephone company may require a
different format for making out-of area (toll)
calls within your area code. See the next
section for the procedure to obtain the
applicable toll-call format for your phone
company.
Deleting Call Records
• When the phone’s memory is full, it
automatically replaces the oldest call record
with the newest incoming call.
• If you do not press any button within about
15 seconds while ERASE ALL CALLS appears
on the display, the phone automatically
returns to normal display and the records are
not deleted.