Roberts Radio R9962 - Manual (Page 6)

Operating your radio - FM
1. Switch on your radio by sliding the Power
On/Off switch to the On position.
2. Slide the Waveband selector switch to the
FM position.
3. Adjust the Volume control until a hissing
sound is heard.
4. Rotate the Tuning control to select the
desired station. The Tuning indicator will
light when the station is correctly tuned. On
FM the Tuning scale is marked in Mega-
hertz (MHz).
5. For FM reception fully extend the
Telescopic aerial and then angle and rotate
for best reception.
6. Adjust the Volume to the required setting.
7. To switch off your radio slide the Power On/
Off switch to the Off position.
1 2
3
4
6 7
5