beautypg.com

Using the alarm system, Arming the alarm, Sounding the panic alarm – Radio Shack RS-2000 User Manual

Page 9: Alarm violations

background image

Need Help? Call 1-800-598-2527

9

USING THE ALARM SYSTEM

ARMING THE ALARM

To arm the alarm, press

ARM

. The

alarm chirps once.

Notes:

• The status indicator turns on

when the system is armed.

• The system ignores current-

sensing violations for 40 sec-
onds after it arms.

• The system ignores shock-sen-

sor violations for 8 seconds after
you it arms.

• If the valet mode is turned off, the

system arms 60 seconds after
you turn off your vehicle.

Temporarily Reducing the
Shock Sensor’s Sensitivity

If you are parking in a severe weather
situation, near a construction zone, or
near heavy traffic, you can temporari-
ly reduce the system’s shock sensor
sensitivity to help prevent false alerts.
To reduce the sensitivity to half its
normal level, first press

ARM

to arm

the system. The alarm chirps once.
Then, within 2 seconds, press

ARM

again. The alarm chirps once in a
lower tone.

To completely turn off the shock sen-
sor, press

ARM

twice within 2 sec-

onds of arming. The alarm chirps in a
lower tone each time you press

ARM

.

When you disarm and re-arm the sys-
tem, the shock sensor returns to its
previous sensitivity setting.

SOUNDING THE PANIC
ALARM

To sound a panic alarm, press and
release

PANIC

. The alarm sounds

loud tones for 30 seconds. Press any
button to stop the panic alarm sooner.

ALARM VIOLATIONS

Your alarm senses violations by mon-
itoring your vehicle’s electrical system
(current sensing) and by detecting im-
pacts (shock sensing).

An alert sounds immediately if the
current sensor detects an electrical
drain such as occurs when a dome or
trunk light turns on.

The first time the alarm senses an im-
pact that exceeds its sensitivity level,
it chirps three times. If it senses an-
other impact within 30 seconds, the
system sounds a full alert.

Note: If an impact is severe, a single
impact can cause a full alert to sound,
without giving a warning.

When your alarm senses a violation,
it sounds extremely loud tones for 30
seconds and then re-arms. To silence
the alert sooner, press any button.

49-820.fm Page 9 Thursday, August 19, 1999 10:29 AM