Radio Shack FLATFOTO B-020405 - Manual (Page 20)

20
Switch the camera on and then connect it to
your PC using the USB cable. ● Connecting the camera to your PC with the
USB cable allows you to do the following:
h Charge the camera battery ( / P.21)
h Download and display images ( / P.28, 34)
h Modify the camera settings, delete images, format the
camera memory and reset the counter (
/ P.32)
h Take care to connect the plugs on the
USB cable into the correct sockets, and
ensure that the plugs are inserted firmly.
h The Auto Power Off function does not
operate when a USB connection is
being used.
CONNECTING THE CAMERA TO A PC
Connecting the camera to your PC with the enclosed USB cable, you can charge the
battery and download your images to your PC.
Check that “FLATFOTO Photo Album” software was installed correctly before connecting the camera to your PC
using the USB cable.
When you connect the camera to a PC, “ 6 ”
appears on the camera’s LCD to indicate that
the camera is communicating with the PC.
✽ The PC switches to standby mode until it recognizes
the camera.