Ryobi 18 VOLT CORDLESS CS1800 - Manual (Page 30)

30
BATTERIES
The battery pack for your chain saw is equipped with
nickel-cadmium rechargeable batteries. Length of
service from each charging will depend on the type of
work you are doing.
The batteries in this tool have been designed to
provide maximum trouble free life. However, like all
batteries, they will eventually wear out. Do not disas-
semble battery pack and attempt to replace the
batteries. Handling of these batteries, especially when
wearing rings and jewelry, could result in a serious
burn.
To obtain the longest possible battery life, we suggest
the following:
■
Store and charge your batteries in a location where
the temperature is above 50°F but less than 100°F.
■ Never store batteries in a discharged condition.
Recharge them immediately after they are dis-
charged.
■ All batteries gradually lose their charge. The higher
the temperature the quicker they lose their charge.
If you store your chain saw for long periods of time
without using it, recharge it every month or two.
This practice will prolong battery life.
DISPOSAL OF THE EXHAUSTED BATTERY
To preserve natural resources,
please recycle or dispose of prop-
erly. This product contains a nickel-
cadmium battery. Must be disposed
of properly. Local, state, or federal
laws may prohibit disposal of Nickel-
Cadmium batteries in ordinary trash.
Consult your local waste authority for
information regarding available recy-
cling and/or disposal options. For more information on
battery recycling call 1-800-8BATTERY.
BATTERY PACK PREPARATION FOR RECYCLING
WARNING:
Upon removal, cover the battery pack’s terminals
with heavy duty adhesive tape. Do not attempt to
destroy or disassemble battery pack or remove
any of its components. Also, never touch both
terminals with metal objects and/or body parts as
short circuit may result. Keep away from
children. Failure to comply with these warnings
could result in fire and/or serious injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Any repairs requiring disassembly should only be
performed by a Ryobi Authorized Service dealer.
For the repair center nearest you, call 1-800-
525-2579.
TRANSPORTING AND STORING
See Figure 44.
■ Do not store or transport the chain saw when it is
running. The chain saw should always be idle
before storing or transporting.
■ Always place the guide bar scabbard on the bar
and chain before storing or transporting the chain
saw. Use caution to avoid the sharp teeth of the
chain.
■ Clean the chain saw thoroughly before storing.
Store the chain saw indoors, in a dry place that is
locked and/or inaccessible to children.
■ Keep away from corrosive agents such as garden
chemicals and de-icing salts.
MAINTENANCE
Fig. 44