Rival GR225 - Manual (Page 7)

-7-
1. Turn TEMPERATURE CONTROL DIAL to "OFF" and then unplug. Allow
griddle to cool before cleaning.
2. Remove the GREASE TRAY and discard its contents. CAUTION: Grease
in drip tray may still be hot even if plate is allowed to cool. To remove
GRIDDLE PLATE slide right spring latch outward until plate is released,
lift plate up by the right side and to the right. The GRIDDLE PLATE and
GREASE TRAY may be washed in the dishwasher. Or
you may wash the GRIDDLE PLATE and GREASE
TRAY with hot, soapy water.
Rinse and dry
thoroughly.
CAUTION: Never use or submerge HEATING BASE
or cord in water. HEATING BASE and cord must
always be completely dry before use.
3. With damp cloth clean the HEATING BASE and
TEMPERATURE CONTROL PANEL.
CARE OF YOUR ELECTRIC GRIDDLE
• Use only nylon, plastic, or wooden utensils with care to avoid scratching
the non-stick cooking surface. Never cut food on the griddle.
• Remove stubborn stains with plastic scouring pad and mild dishwashing
liquid.
CAUTION: DO NOT USE STEEL WOOL.
ANY SERVICE REQUIRING DISASSEMBLY OTHER THAN THE ABOVE
CLEANING MUST BE PERFORMED BY AN AUTHORIZED RIVAL
® SERVICE
CENTER.
HOW TO CLEAN YOUR ELECTRIC GRIDDLE