Rosewill RXS-3211 - Manual (Page 4)

Wired Internet Camera RXS-3211 Quick Installation Guide
Stand Connector: Connects to any standard tripod / camera wall holder.
WPS / Reset Button: Press and release this button to activate WPS mode
(WPS mode is not available in Wired Camera); press and hold this button for
10 seconds to clear all settings of this camera and return to factory default.
Power Jack: Connect to 5V power adapter.
LAN Jack: Connect to LAN by Ethernet cable.
LED Activities Description
LED Name Status Description
Slow Blinking Camera is booting
Steady On Camera is correctly powered
Blue
Off Camera is off
On Camera is correctly powered
Off Camera is not connected to LAN
Green
Flash Camera is logged in
Camera Hardware Installation
Please follow the following instructions to set your IP camera up.
1. Unpack the product package and check if anything missing.
2. Insert supplied LAN cable to “LAN” jack. You can choose to plug the other
end onto one of the following: your computer, and your wired or wireless
router.
3