Roberts Radio RC9907 - Manual (Page 13)

If you need any further advice, please call our Technical Helpline on :-
0208 758 0338 (Mon-Fri)
Activating the hourly alarm
1. Press the Set button, the hours and minutes digits will flash.
2. Repeatedly press the Mode button until the symbol is showing.
3. Press the Set button three times to return to the normal clock display.
4. Set the Operation switch to the Buzz position. The alarm will now
bleep on each hour.
Note : this function is not available if either the radio or tape functions
are being used.
Alarm off Mo de Se t Alarm off M ode Set
Alarm off Mode Set
Operation
Auto Buzz Manual
Making a timed recording
1. Tune in the station you wish to record at the preset time
2. Set the alarm to wake to radio as previously described.
3. Insert a blank cassette into the Cassette compartment.
4. Ensure that the Operation switch is set to the 'Auto' position
5. Press the Record button.
6. The radio will turn on at the preset alarm time. The tape will stop when
tape end is reached.
Operation
Auto Buzz Manual
Play Rewind F. Forward Record Stop/Eject Pause
12
RC9907 Issue 3.pmd 1/26/2007, 1:35 PM 13