Assembly – Ryobi PBC3046B User Manual

Page 8

GRASS DEFLECTOR AND BLADE GUARD
USE

NOTE: When converting from brushcutter to string trimmer,
or string trimmer to brushcutter, make sure the correct
guard/deflector is being used.

See Figure 5.

MUFFLER GUARD ASSEMBLY

See Figure 4.

1. Remove muffler guard and two screws from the owner's

kit.

2. Attach the muffler guard to the rear housing.

NOTE: Make sure the bent end of the muffler guard fits
securely into the opening of the rear housing.

3. Using the torx wrench supplied, install the two screws

and tighten securely.

ASSEMBLY

Fig. 4

BENT END OF

MUFFLER GUARD

OPENING IN REAR

HOUSING

SCREWS

MUFFLER

GUARD

REAR HOUSING

TORX

WRENCH

ATTACHING THE SHOULDER STRAP

See Figure 3.

1. Connect the latch on the shoulder strap to the strap

hanger.

2. Adjust the strap to a comfortable position.

NOTE: To quickly release the product from the shoulder
strap, sharply pull the quick release tab.

SHOULDER

STRAP

LATCH

STRAP HANGER

QUICK

RELEASE

TAB

Fig. 3

GRASS DEFLECTOR FOR

STRING TRIMMER USE

BLADE GUARD FOR

BRUSHCUTTER USE

Fig. 5