Radio Shack PRO-2040 - Manual (Page 24)

24
To skip a frequency, press L/O/
SEARCH SKIP when the scanner
stops on the frequency during a limit
or direct search.
To clear a single frequency from skip
memory so the scanner can stop on
it during a limit or direct search, press
LIMIT to hold the search, press
D
or
—
to select the skipped frequency,
then press L/O/SEARCH SKIP until
LOCKOUT disappears from the dis-
play.
To clear all the skip frequencies at
once, while in the search mode,
press and hold
L/O/SEARCH SKIP un-
til the scanner beeps twice.
Notes:
• If you program more than 50
skip frequencies, each new fre-
quency replaces earlier ones,
starting from the first stored fre-
quency.
• You can select the skipped fre-
quency when the scanner is in
the hold mode. The scanner dis-
plays
LOCKOUT when you
select a skipped frequency.
LISTENING TO
MONITOR MEMORIES
After you temporarily store frequen-
cies into the scanner’s monitor mem-
ories, you can listen to them by
pressing
MANUAL , MON , then the
number for the monitor memory you
want to listen to.
Note: To listen to the monitor memo-
ries, the priority channel feature must
be turned off (see “Designating a Pri-
ority Channel”).
20-414.fm Page 24 Wednesday, August 4, 1999 11:12 AM