Radio Shack MICRO-36 - Manual (Page 11)

11 Operation
RECORDING
1. Load a cassette.
2. Set SPEED on the side of the recorder
as follows:
• To double the cassette’s recording/
playback time, set SPEED to 1.2 .
This setting allows 120 minutes of
total recording/playback time on an
MC-60 tape, or 180 minutes on an
MC-90 tape.
• For better sound quality, set
SPEED to 2.4 . This setting allows
60 minutes of total recording/play-
back time on an MC-60 tape, or 90
minutes on an MC-90 tape.
3. Press REC to begin recording. Both
REC and PLAY lock down.
Caution:
• To protect the recorder, press REC
only when a cassette is loaded.
• Do not force down REC . If you can-
not easily press REC , check the
cassette’s erase-protection tabs
(see “Preventing Accidental Era-
sure” on Page 14).