Roksan Audio C a s p i a n Mseries-1 - Manual (Page 6)

Roksan Audio ltd Caspian Power Amplifier User Manual
CLASSIFICATION: General Use Version: 3.27
All specifications are liable to change without notice. E&OE Page 6 of 8 ENGLISH
MULTI-WIRING AND MULTI-AMPING
Multi-Amping The Loudspeakers
Operation
If the Loudspeakers utilise more than one drive unit with individual input terminals, for example a Tweeter and a
Woofer, then the loudspeaker performance will benefit from Bi-Amping. Dedicating one amplifier to the Tweeter
and another to the Woofer isolates them from each other hence reducing distortion and increasing reserved
power. Speakers work far better with most amplifiers when Multi-Amped than using one yet more powerful
amplifier. Note: Bi-Wiring reduces the impedance seen by the Woofer and the Tweeter and is a first step towards
Bi-Amping.
Please refer to the front and rear panel views on page 4.
S S W W I I T T C C H H I I N N G G O O N N
The Mains power switch (8) is located on the rear panel of the amplifier. This switch should be left ON for normal
operation. If unattended for a long period, the Mains power should be switched OFF and the lead disconnected
from the power supply.
When switched ON from the rear panel, your Caspian Power Amplifier runs a self-test and then enters Standby.
The MANUAL Indicator Light (2) will glow GREEN.
O P E R A T I O N C a s p i a n Power Amplifier
LF
4
MF
4
HF
LF
4
HF