Radio Shack CTR-98 - Manual (Page 9)

9
CASSETTE PLAYER OPERATION
LOADING A CASSETTE TAPE
1. Take up any slack in the tape by
turning the cassette’s hub with a
pencil. If you do not remove
excess slack, the tape might
become tangled in the record/
playback mechanism.
2. Press STOP/EJECT to open the
cassette compartment door.
3. Load the cassette with its open
edge facing up, its full reel to the
right, and the side you want to
play facing you.
4. Gently close the compartment
door.
PLAYING A CASSETTE TAPE
Warning: To protect your hearing, set
VOLUME to MIN before you begin
playing a cassette tape.
1. Set FUNCTION to RADIO OFF/
TAPE.
2. Load a cassette tape.
3. Press PLAY. The cassette plays
until it reaches the end of the
side, then the recorder automati-
cally stops it.
Notes:
• Press PAUSE to temporarily
stop playback. Press PAUSE
again to resume playback.
• Press FAST
−
F or REWIND to
rapidly wind the tape forward
or backward. Press STOP/
EJECT, then PLAY to resume
play.
4. Adjust VOLUME and TONE to
the desired listening levels.
5. Press STOP/EJECT to com-
pletely stop playback before it
automatically stops. Press
STOP/EJECT again to open the
cassette compartment and
remove the cassette tape.
14-728.fm Page 9 Wednesday, June 30, 1999 5:18 PM