Reliable F3 - Manual (Page 5)

5
Operating Instructions
A. To open the front pressing plate
Slowly pull the press board bar to open the front pressing plate. The press
board bar will hold the front pressing plate in the open position.
B. How to insert the pants
1. Place the cuffs or bottom legs of the trousers as far down as possible
between the front pressing plate and the press board. The waistline of the
pants should be hung over top edge of the front pressing plate.
2. Tidy up the slack of pants.
3. Make sure to place the pants in the middle of the front pressing plate, with
the side seam (as indicated in Figure 3.) aligned with the groove (in the
padding - figure not shown) in the front pressing plate.