Reebok Fitness RBEL73580 - Manual (Page 10)

10
Inspect and tighten all parts of the elliptical crosstrain-
er regularly. Replace any worn parts immediately. To
prevent damage to the console, keep liquid away from
the console, keep the console out of direct sunlight,
and remove the batteries when storing the elliptical
crosstrainer.
The elliptical
crosstrainer can
be cleaned with
a soft, damp
cloth. Be sure
to keep the
frame clean
where the
pedal wheels
move.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. Refer to assembly step 1 on
page 5 for battery replacement instructions.
PULSE SENSOR TROUBLE-SHOOTING
¥ Avoid moving your hands while using the pulse sen-
sor. Excessive movement may interfere with heart
rate readings.
¥ If your heart rate is not shown when the pulse sen-
sor is used, press the reset button to reset the pulse
sensor.
¥ Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
¥ For the most accurate heart rate reading, hold the
metal contacts for about 15 seconds.
¥ For optimal performance of the pulse sensor, keep
the metal contacts clean. The contacts can be
cleaned with a soft clothÑnever use alcohol,
abrasives, or chemicals.
Frame
Pedal Wheel
M AINTENANCE AND T ROUBLE-SHOOTING