RCA RS2693 User Manual

Page 2

troubleshooting guide

Compact disc playback

AVC MULTIMEDIA ("AVC") makes the following limited

warranties. these limited warranties extend to the original

consumer purchaser and is limited to non-commercial user of

the product.

One Year Parts & Labor Warranty

aVC products purchased in the united states are warranted to

be free from defects in materials or workmanship for a period

of one year from the date of their original retail purchase. if the

unit fails to conform to this warranty, we will service the product

using new or refurbished parts and products, at

AVC's sole

discretion.

during a period of one year from the effective warranty date,

AVC will provide, when needed, service labor to repair a

manufacturing defect at its designated service Center. to

obtain warranty service in the United States, you must first call

our

Customer Support Center at 1- 877- 252 - 6873, during

the hours listed in the box below. the deternination of

service will be made by aVC customer support.

PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT

PRIOR AUTHORIZATION. new or remanufactured

replacements for defective parts or products will be used for

repairs by

AVC at its designated service Center for one year

from the defective warranty date. such replacement parts or

products are warranted for an additional one year from the date

of repair or replacement. the Customer will be required to ship

the unit to the service Center indicated at the time Customer

support is contacted to make the necessary repairs. the

customer is responsible for all transportation charges to the

service facility.

Important:

also keep your “Bill of sale” as proof of purchase.

model no. ........................ product name ...............................

type of set ...................... serial no. ......................................

invoice no. ...................... date purchased ............................

dealer name ...............................................................................

For serViCe and repair, please Visit

www. rcaav.com.

Specifications and external appearance are subject to change

without notice.

Packaging and Shipping Instruction

when you send the product to the aVC service facility you

must use the original carton box and packing material or an

equivalent as designated by

AVC.

LIMITED WARRANTY

Your Responsibility

(1) You must retain your bill of sale to provide proof of

purchase.

(2) these warranties are effective only if the product is

purchased and operated in the u.s.a. or Canada.

(3) warranties extend only to defects in material or

workmanship, and do not extend to any product or parts

which have been lost or discarded, or damage to product

or parts caused by misuse, accident, improper operation

or maintenance, or use in violation of instructions provided

with the product, or to product which has been altered or

modified without authorization of

AVC, or to products or

parts thereof which have had the serial number removed

or changed.

limited warranty

Out of Warranty

all warranties implied by state law, including the implied

warranties of merchantability and fitness for a particular

purpose, are expressly limited to the duration of the limited

warranties set forth above. with the exception of any warranties

implied by state law as hereby limited, the foregoing warranty

is exclusive and in lieu of all other warranties, guarantees,

agreements and similar obligations of manufacturer or seller

with respect to the repair or replacement of any parts. in

no event shall

AVC be liable for consequential or incidental

damages.

no person, agent, distributor, dealer or company is authorized

to change, modify or extend the terms of these warranties

in any manner whatsoever. the time within action must be

commenced to enforce any obligation of

AVC arising under the

warranty or under any statute, or law of the united states or

printed in China

811-669391W020

1. slide the FunCtion selector to Cd. the power on indicator lights up.

2. press the to open the disc compartment.

3. place a disc onto the disc holder, with the label side up.

4. press the button again to close the Cd door. the total number of tracks

will show in the Cd display for a few seconds.

5. press the PLAY/PAUSE

button to start playback. the

• symbol

indicating playing will appear on the screen.

TO STOP PLAyING:

(a) press the

PLAY/PAUSE

button and the

• indicator will flash. Press

this button again to resume playing.

(b) press the

STOP

button.

TO SKIP TO A DIFFERENT TRACK

•

to skip to the beginning of the current track or previous track, press the

button.

• To skip to the beginning of the next track, press the

button.

•

a short period of time will be needed for the disc to read the information of the desired track before playback can begin.

TO FAST FORWARD OR FAST REvERSE TO A PARTICULAR POINT

•

to scan forward at high speed, press and hold

the

button and release it at the desired point.

• To scan backward at high speed, press and hold the

button and release it at the desired point.

•

Fast forward or fast reverse will continue searching the Cd until it reaches the end.

PROGRAMMABLE PLAYBACK

To Cancel Repeat Play

• Press the repeat button until the repeat indicator turns off.

Connecting with other external equipment

CLEANING THE UNIT

• Do not use volatile chemicals on this unit. Clean by lightly

wiping with a dry soft cloth.

• Keep the CD Drawer closed to keep dust out of the unit.

CLEANING THE CD

• If the CD skips or will not play, the disc may need to be

cleaned. Before playing, wipe the disc from the center

outwards with a clean cloth. after playing, store the disc in its

case.

IMPORTANT NOTE

• If an abnormal display indication or an operating problem

occurs, disconnect the aC adapter. wait at least 5 seconds,

then reconnect it.

• Before transporting the unit, remove the disc from the disc

compartment.

maintenance

Listening to the Audio Signals from the External Equipment
1) Connect the AC power cord to the wall outlet.
2) Connect the plug of the line-in cable from line-in

jack to the audio out or earphone jack of the external

equipment.

3) slide the FunCtion selector to the auX position.
4) turn on your audio equipment and play the external source.

FOR PERSONAL LISTENING

Connect headphone/earphone (Ø3.5mm stereo mini plug) to

the phones jack.

when headphones are connected, the speakers are

automatically disconnected.

Note: excessive sound pressure form earphones and

headphones can cause hearing loss.

SyMPTOM

no sound.

no sound from one channel or unbalanced

left and right volume.

reversed left and right sound.

lack of bass sound or imprecise physical

location of musical instruments.

severe hum or noise.

disc in place but unit won’t play.

disc skips.

RADIO

poor Fm reception.

poor am reception.

CAUSE (AND REMEDy)

• Turn VOLUME clockwise.

• The headphones are connected. Disconnect them.

• Check the speaker connections of the inoperative channel.

• Check the speaker cord connection and speaker location.

• Check the speaker connection for proper phasing - ensure that the positive terminal

from the amplifier is connected to the positive terminal of the speaker.

• A TV or VCR is too close to the stereo system. Separate the stereo system from the

tV or VCr.

• Make sure the AC power cord is connected to the wall outlet.

• Make sure FUNCTION selector is set to CD.

• Make sure disc label is facing up.

• Make sure disc is clean.

• Pause mode is activated.

• Disc may be damaged or dirty; check disc.

• Make sure the unit is on a secure spot. Vibration or jarring can cause the disc to skip.

• Make sure FM antenna wire is unwound.

• Electrical interference in your home can cause poor reception. Move the unit away

from sources of interference (especially those with motors and transformers).

• Reposition or turn the main unit for better reception.

STANDBY

AUX

TUNER

POWER ON

PROG

REPEAT ONE
REPEAT ALL

20 tracks can be programmed to play in a preset order.

1. When the unit is ON and in CD MODE, make sure the CD is STOPPED. Press the

PROG button, the screen appears as below:

2. press the

buttons to select the desired track. For example, to play track 3 first, the display will look like this:

note:

• CD, CD-R and CD-RW are supported on this unit.

• .mp3 and .WMA files are not compatible with this unit.

REPEAT PLAyBACK DURING PLAyBACK MODE

To Repeat the Current Track

•

press the repeat button, the • indicator located in the right bottom corner of the screen will flash. The current track will be

played repeatedly until the stop

button is pressed.

3. press the

PROG button to store the track in memory.

4. to add additional tracks, repeat steps 2 - 3 (up to 20 tracks).

5. to start playback, press the PLAY/PAUSE button.

To check the program:

• After setting, the PROG indicator lights up. Press the PLAY/PAUSE button to start playing, then press the

buttons

to check the programmed tracks.

To add additional tracks during program playback:

• Press the

STOP button, then press the PROG button repeatedly until the number of the last programmed track appears and

repeat steps 2-4 above.

To change the programmed tracks during program playback:

• Press the

STOP button, and press the PROG button repeatedly to select the number of the program, then press the

buttons to alter the track. press the PROG button to register the newly programmed track into memory.

To erase the whole program, do one of the following:

• Press the

STOP button twice.

• Switch the FUNCTION selector to radio mode.

• Open the CD drawer by pressing the button.

once the whole program list has been erased, the prog indicator will be oFF.

note: you can use the repeat function during program play.

To Repeat the Whole Disc

• Press the repeat button twice, the

• indicator located in the right bottom corner of the screen will light up. the current disc

will be played repeatedly starting from the current playing point.

POWER ON

PROG

REPEAT ONE
REPEAT ALL

POWER ON

PROG

REPEAT ONE
REPEAT ALL

POWER ON

PROG

REPEAT ONE
REPEAT ALL

POWER ON

PROG

REPEAT ONE
REPEAT ALL

POWER ON

PROG

REPEAT ONE
REPEAT ALL

POWER ON

PROG

REPEAT ONE
REPEAT ALL

POWER ON

PROG

REPEAT ONE
REPEAT ALL

POWER ON

PROG

REPEAT ONE
REPEAT ALL

when this

lights up, it indicates that the unit is playing a disc.

If the disc playback is paused, it will flash.
if the

STOP

button is pressed, it will disappear.

Note: When it flashes, it indicates that

the unit is

playing a track repeatedly.

if it lights up, the unit will play the

whole disc repeatedly.

while creating a program track list,

the prog indicator flashes. after

setting, it will light up.

in the event your product requires repair after the limited

warranty period has expired, please contact our Customer

support Center at

1-877-252-6873 or

www.rcaav.com.

hours: monday-thursday: 9am-7pm, Friday: 9am-5pm,

saturday: 9am-noon eastern time.
Important:

you are responsible for any transportation, shipping or

insurance relative to the return of the product to our product

returns Center.

any state thereof, is hereby limited to one year from the date of

purchase. this limitation does not apply to implied warranties

arising under state law.

This warranty gives you specific legal rights and you may also

have other rights, which may vary from state to state. some

states do not allow limitation on how long an implied warranty

lasts, when an action may be brought, or the exclusion or

limitation of incidental or consequential damages, so the above

provisions may not apply to you.

For more information on other products and services, please

contact our web site at

www.rcaav.com.

- 15 -

- 14 -

- 18 -

- 17 -

- 16 -