RCA ANT3901 - Manual (Page 7)

7
7. Disconnect the satellite cables from the “OUTPUT”
or “TO RECEIVER” terminals on your multi-switch.
8. Connect the satellite cables to the “OUT” 1-4 terminals
on the ANT3901 antenna (see Fig 5 on page 7).
9. Using the black 32”antenna cables, connect the “IN”
1-4 terminals of the ANT3901 to the “OUTPUT” or
“TO RECEIVER” terminals on your multi-switch
(see Fig 6 on page 7).
10. Continue to “Step B: Installing the Inside Diplexers”
(on page 8) and follow the remainder of the standard
installation procedure.
Fig 5
Fig 6
ANT3901new 4/29/03 8:37 Page 7