Radio Shack TAD-277 - Manual (Page 7)

7
2. Lift open the cassette compart-
ment door.
3. Hold down OGM REC/PLAY until
the message indicator turns off,
then release the button. The TAD-
277 beeps once.
4. When the message indicator turns
on again after a few moments,
speak clearly in a normal volume
from about 12 inches away from
the microphone.
Note: The TAD-277 records only
the first 30 seconds of your outgo-
ing message.
5. When you finish recording your
message, press OGM REC/PLAY
again. The TAD-277 beeps, re-
winds the tape, and plays back
the message as it is recording it
from the digital chip to the tape.
(The message is backed up on
tape so after a power failure it can
be automatically restored to the
chip).
After the message plays back, the
TAD-277 sets itself to answer
calls, beeping twice to indicate it is
set.
6. Adjust VOLUME to a comfortable
listening level.
Checking the Outgoing
Message
Press OGM REC/PLAY at any time to
hear the outgoing message. Set VOL-
UME to the desired level.
Microphone
43-777.fm Page 7 Friday, August 13, 1999 3:44 PM