Rockford Fosgate FA15.0 - Manual (Page 4)

– ii –
Power Rating
Signal-to-Noise
CMRR
Input Impedance
Input Sensitivity Range
Maximum Input
Gain
Crossover Frequency Variable from 40Hz~140Hz
Crossover Slope 24dB/octave (4th order) Linkwitz-Riley
Subsonic Filter 12dB/octave (-3dB @ 18Hz)
Specifications are subject to change without notice.
Idle Power: 11W / 150mA @ 120 VAC
Idle Power: 11W / 90mA @ 230 VAC
Normal Operation: 66W / 380mA @ 230VAC
Full Power: 330W / 3.3A @ 120VAC
Full Power: 315W / 1.7mA @ 230VAC
Unbalanced RCA Inputs
Gain Control (30dB range)
Low Pass Crossover (variable 40Hz~140Hz)
Phase DIP Switches (0°, -90°, -180°, -270°)
200W RMS @ 4 ohms
>100dB
>70dB typical @ 60Hz
47k
Ω
per phase balanced, 47k
Ω
unbalanced
RCA Input: 160mV to 5V RMS
Speaker Input: 50mV to 45W (receivers that
drive nominal 8
Ω
speaker loads)
RCA Input: 10V RMS
Speaker Input: 180W (receivers that drive
nominal 8
Ω
speaker loads)
+45dB max. to +15dB min.
Performance Specifications - Amplifier Section
Power Consumption
Rear Panel
Low -Pass Crossover Section