Riccar SUPRALITE RSL3C - Manual (Page 6)

10 11
Vacuum Features
On/Off Switch
NOTE: There are three different on/off switch
configurations depending on the model you
own. Identify your vacuum cleaner model and
see the corresponding on/off switch operating
instructions below.
Models: RSL1A and RSL1AC –
On/Off switch on base:
Locate the switch on the back side of the nozzle
to the left of the handle tube (see figure 10).
Simply press the switch with your foot to turn
the vacuum on or off.
Machine should be turned off before returning
handle to full upright position. Always turn the
vacuum cleaner off before unplugging it from the
electrical outlet.
Models: RSL3 and RSL3C –
On/Off switch on handle:
Locate the switch on the top of the vacuum
handle. Using your thumb, push the switch
forward to turn the machine on and pull
the switch backward to turn the machine
off (see figure 11).
Machine should be turned off before returning
handle to full upright position. Always turn the
vacuum cleaner off before unplugging it from the
electrical outlet.
Models: RSL4, RSL5 and RSL5C –
On/Off two speed switch on handle:
The switch for these models, located on the
vacuum handle, is a three-way switch. The
middle position is the off setting, the rear
position is the on setting and the forward
position is for maximum power (see figure 12).
Use the maximum power setting for carpet
cleaning and the on setting for cleaning bare
floors and throw rugs.
Fig. 10
Fig. 11
Fig. 12
Vacuum Features
On/Off two speed switch on handle cont.
Pull the switch backward to turn the vacuum on.
Push the switch halfway back to turn the vacuum
off. Push the switch all the way forward to use the
maximum power setting.
Machine should be turned off before returning handle
to full upright position. Always turn the vacuum cleaner
off before unplugging it from the electrical outlet.
Edge Cleaning
The edge cleaning feature provides improved cleaning
near walls and stationary furniture. For maximum edge
cleaning, place the left side of the nozzle against the
wall or stationary furniture.
Automatic Carpet Height Adjustment
Your SupraLite vacuum is designed with an automatic,
self-adjusting nozzle. No manual adjustments are
required. The height of the nozzle is instantly and
automatically adjusted to the flooring surface. This self-
adjusting feature allows the nozzle to float evenly over
all flooring surfaces.
Bare Floor Cleaning - Models RSL4, RSL5
and RSL5C
The RSL4, RSL5 and RSL5C models come equipped
with a squeegee on the bottom of the vacuum to
improve its effectiveness in cleaning bare floors.
When cleaning tile, hardwood, linoleum, etc.,
use the on setting, as opposed to the maximum
power setting, for best results. (See figure 13)
Fig. 13