Radio Shack SCR-65 - Manual (Page 5)

4
PLAYING A CASSETTE TAPE
1. Slide TAPE RADIO OFF/RADIO to TAPE
RADIO OFF .
2. Load a cassette tape.
3. Press PLAY .
4. Adjust VOLUME MIN/MAX as desired.
5. Press STOP/EJECT to stop play back
before it automatically stops at the end of
that side. Press
STOP/EJECT again to
open the cassette compartment and
remove the cassette tape.
RECORDING
You can record from the radio, or use the
built-in microphone to make a live recording.
Recording from the Radio
1. Load a blank cassette tape (or one you
want to record over) into the cassette
compartment.
2. Slide AM/FM/FM STEREO to the desired
band.
3. Adjust TUNING to the station you want to
record.
4. Press RECORD to begin recording. Both
PLAY and RECORD lock down.
5. Press STOP/EJECT to stop recording.
Making Live Recordings
Follow these steps to make live recordings us-
ing the built-in microphone
1. Load a blank cassette tape (or one you
want to record over) into the cassette
compartment.
2. Slide TAPE RADIO OFF/RADIO to TAPE
RADIO OFF .
3. Press RECORD to begin recording. Both
PLAY and RECORD lock down.
4. Speak into the built-in microphone, or
place it near the sound source.
5. Press STOP/EJECT to stop recording
before it automatically stops.
TAPE TIPS
Restoring Tape Tension and
Sound Quality
After you play a cassette tape several times,
the tape might become tightly wound on the
reels. This can cause playback sound quality
to deteriorate.
To restore the sound quality, fast-forward the
tape from the beginning to the end of one
side, then completely rewind it. Then loosen
the tape reels by gently tapping each edge of
the cassette on a flat surface.
Caution: Be careful not to damage the cas-
sette when tapping it. Do not touch the ex-
posed tape or allow any sharp objects near
the cassette.
Erasing Tapes
To record over a cassette tape, simply record
as usual. The cassette deck records over the
previous recording.
You can quickly erase both sides of a cassette
tape using a RadioShack bulk tape eraser.
Note: If you use metal or high-bias type tape,
the recorded sound might not be erased prop-
erly.
Preventing Accidental Erasure
Cassette tapes have two erase-protection
tabs — one for each side. When a tab is in
place, you can record on that side.