Rosewill RC-405X - Manual (Page 3)

10/100M Fast Ethernet Switch 5/8 port RC-405X/RC-406X User Manual
2
y
Store-and-forward switching improves overall network performance
y
Supports full-duplex switching bandwidth modes, allowing data rates of 10, 20 and 100Mbps
y
Full-duplex transfer mode / half-duplex adaptive
y
Provides packet switching functions between all sixteen 10/100Mbps Ethernet ports
y
10/100Mbps auto-sensing and negotiation allows flexibility between network devices
y
Wire-speed forwarding: 148,800pps/100Mbps and 14,880pps/10Mbps
y
High-performance memory bandwidth and expansion bus
y
Supports the spanning tree protocol, eliminating network loops
y
Supports broadcast storm control function
y
Supports port trucking and load sharing for high-performance servers and inter-switch links. Provides a convenient
uplink port for cascading hubs
y
Auto-partitioning and data collision control
y
Auto-polarity detection
Specification
y
Network standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
y
Interface Media 10Base-T: 3 or 3 more than UTP, 100Base-TX: 5 types of UTP
y
Instructions for each panel port: Link / Act (to connect / work), 10/100Mbps (speed), other: Power (Power)
y
Environmental standard operating temperature: 0 ℃ -40 ℃, Storage temperature: -40 ℃ -70 ℃, Operating
Humidity: 10% -90% RH non-condensing,
y
Storage humidity: 5% -90% RH non-condensing
y
Dimensions (mm): 5-port: 91.5(L)*82(W)*27(H) mm
8-port: 163(L)*95(W)*28(H) mm
y
Power Supply: 9V 0.5A
Figures of Product
Front Panel
The unit front panel provides a simple interface monitoring the Switch. It includes a power led and 5/8 led indicator for
each port.
y Rear Panel y Side Panel
5-port