Loose parts, Tools needed – Ryobi SC164VS User Manual

Page 8

Page 8

LOOSE PARTS

Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.

• 3 mm T-Handle Hex Key

• 4 mm Hex Key

• Blade(s)

• Plastic Tubing

The following tools (not included) are needed for adjustments and alignment:

• Combination Square

• Phillips Screwdriver

• Slotted Screwdriver

COMBINATION

SQUARE

PHILLIPS SCREWDRIVER

Fig. 3

SLOTTED SCREWDRIVER

TOOLS NEEDED

Fig. 2

PLASTIC TUBING

BLADE

3 mm T-HANDLE HEX KEY

4 mm HEX KEY