Roberts Radio Digital Radio with Dual Alarms CRD-29 - Manual (Page 5)

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
020.8758.0338.(Mon-Fri)
4
Mains operation
1. Place the unit on a flat surface. Plug the mains lead into a wall socket
and switch on the wall socket.
2. The display will show "Clock Setting..." for a few seconds before
returning to clock display.
3. The clock radio will attempt to set the clock from a DAB signal. If a
signal is found then the time will be displayed. If no suitable signal is
found, the radio will display "Clock N/A" and will then display a time
of 00:00. If this happens it is not a fault. The time should be set once
a DAB signal is being received, see page 5.
Please note the time must be set before the alarm function can be
used.
• The mains plug is used to connect your apparatus to the AC mains
supply. In order to completely disconnect the apparatus from the AC
mains supply, the mains plug should be removed from the mains
socket outlet.