Appendix d trouble shooting, Rikaline, D.1 trouble shooting problems reasons methods – Rikaline GPS-6033 User Manual
Page 19
Next Generation GPS Bluetooth GPS
GPS-6033 Operating Manual
10F, 64, Kang-Ding Road, Taipei 108, Taiwan
Tel: ++886 2 2370 4688 Fax: ++886 2 2370 4686 E-Mail: [email protected] Web: www.rikaline.com.tw
19
Rikaline
Rikaline
International Corp.
Appendix D Trouble Shooting
D.1 Trouble Shooting
Problems
Reasons
Methods
No position output but
timer is counting
Weak or no GPS signal can be
received at the place of GPS-6033
Find an open space for your
GPS-6033
No position output but
timer is counting
At outdoor space but GPS signal is
blocked by building or car roof.
Use an optional Active Antenna
Execute fail
Bluetooth function unstable
Re-Start PDA or PC or re-install
software
Can not turn on the
COM port
Install GPS-6033 incompletely or The
COM port of the device is being used
Install GPS-6033 completely or stop
other device that is being used.
Can not find out
GPS-6033
Poor connection
Re-Start PDA or PC and re-install
software.
No Signal
No action for few minutes may
cause the Pocket PC entry power
saving mode. It will close the COM
port at the same time.
Close the application and execute it
again to re-open the COM port.
No Signal
Weak or no GPS signal when
using GPS-6033 indoor
Go outdoors to improve the poor
GPS signal.