Preparation, Installing/replacing the battery – Ricoh TRC-509 User Manual
Page 4
4
PREPARATION
INSTALLING/REPLACING THE
BATTERY
Your walkie-talkie uses one 9 volt battery (not sup-
plied) for power. For the longest life and best perfor-
mance, we recommend you use an alkaline battery
such as RadioShack Cat. No. 23-553.
Caution: Use only a fresh battery of the required
size and recommended type.
Follow these steps to install a battery.
1. Slide the battery compartment cover in the
direction of the arrow to remove it.
2. Snap the battery onto the battery connector
inside the compartment. The connector only
fits on the battery one way.
Fig. 1
21-409.fm Page 4 Thursday, August 5, 1999 3:31 PM