Roberts Radio RD-25 User Manual

Page 16

Manual tuning - FM and MW

1. Press

the

On/Off button to switch on your radio.

2. Press

the

Band button to select the FM or MW band. Fully extend the

telescopic aerial for FM reception. For MW reception there is a built in
ferrite aerial. Rotate your radio to the position giving best reception.

3. Rotate

the

Tuning control to tune to a station. The frequency will

change in steps of 50 kHz on FM. On MW the frequency will change
in steps of 9 kHz.

4. When the waveband end is reached the radio will recommence tuning

from the opposite waveband end.

5. Set

the

Volume control to the desired settings.

6. To switch off your radio press the On/Off button.