Sony KV-32FX68K - Manual (Page 13)

13 Menu System
Level 1 Level 2 Level 3 / Function
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
a)
i
Preset channels or the VCR channel one
by one to the programme order of your
choice. To do this:
After selecting the ”Manual Programme
Preset” option, press
then with
Programme option highlighted press .
Press or to select on which
programme number you want to preset the
channel (for VCR, select programme
number “0”). Then press
.
ii The following option is only available depending on the country you have selected in the
“Language/Country” menu.
After selecting the System option, press . Then press or to select the TV Broadcast system
(B/G for western European countries, L for France or I for United Kingdom). Then press .
iii After selecting the Channel option, press . Then press or to select the channel tuning (“C”
for terrestrial channel or “S” for cable channels). Next press . After that, press the number
buttons to enter directly the channel number of the TV broadcast or the channel of the VCR signal.
If you do not know the channel number, press
or to search for it. When you tune the desired
channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b) Label a channel using up to five characters.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number with the channel you wish to name. When the programme you want to name
appears on the screen, select the Label option and press
. Next press or to select a letter,
number or “-“ for a blank. Press to confirm this character. Select the other four characters in the
same way. After selecting all the characters, press OK twice to store.
c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best
possible picture, however you can manually fine tune the TV to obtain a better picture reception
in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press
. Next press or to adjust the fine tuning between -15 and +15. Finally
press OK twice to store.
d) Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number you want to skip. When the programme you want to skip
appears on the screen, select the Skip option and press
. Next press or to select Yes.
Finally press OK twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e) View and record scrambled channels when using a decoder connected to Scart i3/r3 directly
or through a VCR.
This option is only available depending on the country you have selected in the ‘Language/
Country’ menu.
To do this: select the Decoder option and press . Next press or to select On. Finally press
OK twice to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
01gbkv32.fm Page 13 Tuesday, February 4, 2003 4:06 PM