Installer, Installation menu – Russound CAM6.6T-S1 User Manual

Page 61

commands including other macros and delays.

See Macro Editor - Flow Chart on page 74

1. MACRO ID –

Number of Macro up to 132 including any previously named

(MacID)

macros.

2. MACRO NAME –

Name of Macro (optional).

(MacNm)

3. COMMAND NUM –

Number of Command up to 10.

(Cmd#)

4. COMMAND TYPE –

Select the type of source command (e.g., CD, TV, etc.).

(CmdTp)

a. Selected: Learned IR

Choose Learned IR if the pre-programmed IR code library does

(LrnIR)

not support the source component.

i. LEARNED SRC –

Select the learned source bank to be assigned to the source

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 6)

b. Selected: Unassigned

Selected command and subsequent commands are cleared.

(Unasg)

Procedure advances to COMMAND NUM (step 3)

c. Selected: Default

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 6)

d. Selected: Macro:

(Macro)

i. MACRO -

A macro can “call” another macro if a sequence of more than 10

(Macro)

commands is needed.

ii. MACRO ID –

Enter the macro ID number. Menu advances to COMMAND NUM

(MacID)

(step 3)

e. Selected: Delay

Enter a 1- to 60-second delay time to postpone delivery of the

(Delay)

next command in the macro. Procedure advances to COMMAND
NUM (step 3)

f. All Other Selections:

Procedure advances to DEVICE CODE (step 5)

5. DEVICE CODE –

Source component code for IR control.

(DevCd)

6. KEY FUNCTION –

Select a function (Play, etc.).

(KeyFn)

INSTALLER

INSTALLATION MENU