En 8 8, Chimney assembly – Rangemaster GLX390 User Manual

Page 8

RECIRCULATION VERSION AIR OUTLET

• Insert the connection extension pieces laterally 14.1 in connec-

tion 15.

• Insert the Connector 15 into the Support bracket 7.3 and fix it

with a screw.

• Make sure that the outlet of the extension pieces 14.1 is hori-

zontally and vertically aligned with the chimney outlets.

• Connect the air outlet connection 15 to the hood body outlet

using either a flexible or rigid pipe ø 150 mm, the choice of
which is left to the installer.

• Ensure that the activated charcoal filters have been inserted.

ø 150

14.1

7.3

Chimney assembly

Upper exhaust Chimney
• Slightly widen the two sides of the upper chimney and hook

them behind the brackets 7.2.1, making sure that they are well
seated.

• Secure the sides to the brackets using the 4 screws 12c (2,9 x

9,5) supplied.

Lower exhaust Chimney
• Slightly widen the two sides of the chimney and hook them

between the upper chimney and the wall, making sure that they
are well seated.

• Fix the lower part laterally to the hood body using the 2 screws

12c (2,9 x 9,5) supplied.

2.1

2.2

7.2.1

12c

2.1

2.2

ELECTRICAL CONNECTION

• Connect the hood to the mains through a two-pole switch hav-

ing a contact gap of at least 3 mm.

• Remove the grease filters (see paragraph Maintenance) being

sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.