RCA F20645 - Manual (Page 8)

6
Setup and Connections
Once you have made your connections,
you will need to program the TV to tune
to the correct video input channel in
order to see and hear audio and video
from a component such as a VCR or DVD
player. You will program this later in the
Interactive Setup.
VIDEO
R L
S-VIDEO
AUDIO
R L
CABLE/
ANTENNA
G-LINK
IN
OUT
Cable/Antenna
Takes the signal input from a cable,
cable box, or an off-air antenna. Can also
be used for basic component connections.
G-LINK
Connect the G-LINK cable
for one-button recording
and channel tuning from
the GUIDE Plus+ Gold
System.
* S-Video
This optional
connection can
be used for
better video
quality picture.
VIDEO and Audio Inputs
Connect any one of the following components:
• VCR
• Internet Access Device
• Laserdisc Player • DVD Player
• Satellite Receiver
To view the component connected to VIDEO,
use the WHO•INPUT button on the remote.
* Audio Outputs
Connect to an audio receiver or
amplifier for variable controlled
or fixed level stereo output.
Back of the TV
The diagram below describes each of the back panel jacks. When
connecting A/V cables, be sure to connect corresponding OUTPUTS and
INPUTS (Video to Video, Right Audio to Right Audio, etc.).
Advanced Connections
Advanced connections give you better sound and video by separating
the audio and video signals and enabling you to connect multiple
components.
This section describes the types of inputs available on the back of your
TV and suggests ways you can use them for optimum performance.
* These jacks are not available for models F19625 and F20625.