ROWENTA PRO FRESH DG7160 - Manual (Page 6)

co
tt o n -l in
e n
s il
k -w
o o l
s y n t h e t i c s
M
IN
c o
tt
o n -l in
e n
s i l k - w o o l
sy
n th
e ti
c s
M IN
c o t t o n - l i n e n
s
ilk
-w
o o
l
s y
n th
e tic
s
M IN
Recommendations:
To prime the steam circuit, either before using the iron for the first time, or if you have not used
the steam function for a few minutes, press the steam control button several times in a row,
holding the iron away from your clothes.
This will enable any cold water to be removed from the steam circuit.
• Iron temperature control setting :
- Start with fabrics to be ironed at a low temperature (
• ) and finish with those which need
higher temperatures ( ••• or Max).
- Mixed fibre fabrics : set the ironing temperature to the setting for the most delicate fabric.
- Woollen garments : press repeatedly on the steam control button to obtain short bursts of
steam, without placing the iron on the garment itself. This will avoid making the fabric shiny.
• Steam output control dial setting :
- Thick fabric : increase the steam setting.
- At a low temperature : set the steam output control dial to the low position.
• Dry ironing :
- Do not press the steam control button beneath the iron handle or the “Precision Steam Jet”
button on the iron handle.
• If you are using starch, it should be sprayed onto the reverse side of the fabric to be ironed.
• Ironing board :
For best results a mesh type ironing board should be used to allow any excess steam to escape.
GB
SETTING THE TEMPERATURE CONTROL AND STEAM OUTPUT CONTROL
DIAL ACCORDING TO THE TYPE OF FABRIC TO BE IRONED :
Type of fabric
Setting temperature
control
Setting steam output
control dial
•
(Low
temperature)
••
(Medium
temperature)
•••
(High
temperature)
Synthetics
Silk / Wool
Cotton / Linen