RCA MACINTOSH CDS1000 - Manual (Page 14)

First Things First
10
Viewing Stored Images
The images stored on the CompactFlash card can be
viewed on the camera’s LCD monitor, viewed on a TV
screen, or downloaded to your computer. For more
information about viewing images on the computer or
the TV, see the section, Working with Images, in this
manual.
LCD Picture Viewing
1. Slide the MODE switch on the back of the camera
to the PLAY position. After a moment, an image
will appear on the LCD screen.
2. Press the /+ (self timer/plus) button on top of the
camera to see the next stored image, or the /–
(flash/minus) button to see the previous one.
• Pressing and holding the /+ or the /– button for
more than two seconds will automatically forward
or reverse through displayed images every two
seconds. Press either button again to stop
automatic play.
• Until the CompactFlash card is replaced, the
camera memorizes the last image played back at
the last power off and displays this same image
when the power is turned back on.
• Only images recognized by the camera can be
displayed.
The picture number is displayed on the LCD panel.
This is the number currently assigned to the picture
being viewed. This number may change after erasing
images.
The number of images that can be stored on the
CompactFlash card varies depending on the camera’s
settings. For more information about specific settings,
see, Setting Preferences, in the next section.
The /+ or the /– buttons
allow stored images to be scrolled
through or viewed one at a time.