Operation – RedMax US-1 EBZ5100Q User Manual

Page 12

■ ADJUSTING IDLE SPEED
• The idling speed is set for 2200 rpm at

the factory. If it is necessary to adjust
the idle speed, use the adjustment
screw on the top side of carburetor.

(1) Idling Adjustment Screw

■ STOPPING ENGINE
1. Move the throttle lever to the idling

position and run the engine for a half
minute.

2. Shift the ignition switch to “STOP(O)”

position.

(1) Ignition Switch

If the engine won’t stop when setting
the ignition switch to the stop position,
close the choke lever and stop the
engine.
In this case, please repair the machine
at your nealest servicing dealer. (F12)

(1) Choke Lever
(2) OPEN
(3) CLOSE

NOTE

US-12

EBZ5100Q

■ ADJUSTING THE SHOULDER

STRAPS

Tightening:
• Pull on the end of the strap.

Loosening:
• Pull up on the lower portion of the

buckle with a finger and slide the end of
the strap back up to the buckle.

■ EMERGENCY REMOVAL
• In an emergency, pull up on the lower

portion of both strap buckles to loosen
the straps. Move yourself away from
the unit.

(1)

F10

“ I ”

“O”

(1)

F11

8. Operation

F12