Bridged operation ez-bridged operation – Rockford Fosgate 250.2 User Manual
Page 21
– 18 –
•
RCA inputs are connected to both
left and right channels
•
Signal Input Switch selected to
Unbalanced for RCA input
•
Left Phase Switch set to
0
°
•
Right Phase Switch set to
180
°
•
Inverting the right signal will allow the bridged woofer to operate correctly
•
Gain for left and right channels
set equally to balance the subwoofer
•
Impedance for
bridged channel should be 4
Ω
minimum
•
XCard is in
High-Pass, Low-Pass or Full Range position
Bridged Operation
EZ-Bridged Operation
I
N
S
T
A
L
L
A
T
I
O
N
®
®
•
RCA input is connected to
L (Mono) input
•
Signal Input Switch to
Unbalanced for RCA input
•
Left Phase Switch at
0
°
•
Right Phase Switch set to
E-Z Bridge for the following to occur:
L (Mono) RCA input to drive both the left and right channels
Left Gain will control both the left and right channels
Right Phase will be inverted
180
°
which will allow the bridged woofer to operate
correctly
•
Impedance for
bridged channel should be 4
Ω
minimum
•
XCard is in the
High-Pass, Low-Pass or Full Range position
Gain
R
Unbal.
Pass
Thru
Bal.
Input
L
0
°
-180
°
E Z - 1 8 0
°
- 0
°
Bridged
Gain
Bal.
+
–
4
Ω
min.
RCA Input
+
Speaker
Terminal
–
Speaker
Terminal
Speaker
+ L –
Speaker
– R +
R
L (Mono)
R
Unbal.
Pass
Thru
R
Bal.
Input
L
0
°
-180
°
E Z - 1 8 0
°
- 0
°
Bridged
Gain
Bal.
Gain
+
–
4
Ω
min.
Mono
Input
+
Speaker
Terminal
–
Speaker
Terminal
Speaker
+ L –
L (Mono)
Speaker
– R +