Radio Shack Okidata C6100 - Manual (Page 19)

18
11. Use the provided LED lens
cleaner. Gently wipe the LED.
12. Close and latch the top cover.
Replace the Fuser
WARNING!
If the printer has been powered on, the fuser is HOT. This area is clearly labeled. Do not
touch it. Handle the fuser with extreme care. Hold it only
by its handle, which is only mildly
warm to the touch.
If in doubt, switch the printer off. Wait at least 10 minutes for the fuser to cool before
opening the printer cover.
1. Press the cover release and
open the top cover.