Roberts Radio R9939 - Manual (Page 12)

Operating your radio - search tuning
1. Switch on your radio by pressing the On/Off button.
2. Select the required waveband by pressing the Band button. The
waveband selected will appear in the display. On FM fully extend
the Telescopic aerial. On MW and LW rotate your radio for best
reception.
3. Press and hold down either the Tuning Up or Down buttons or
turn the Tuning control left or right until the frequency in the display
begins to change rapidly. Release the button. Your radio will scan
the selected waveband, stopping each time it finds a station of
sufficient strength.
4. Adjust the Volume, Bass and Treble controls to the required
settings.
5. To search for additional stations repeat the above procedure.
Search tuning may be stopped by a single press on either the
Tuning Up or Down buttons.
6. Press the On/Off button to switch off your radio.
11
3
3
1
2
3 3
6
4
4
4