Rosewill WIRED INTERNET CAMERA RXS-3323 - Manual (Page 5)

Internet Camera RXS-3323/RXS-4324 Quick Installation Guide
Installation
Hardware Installation:
- Camera LAN and Power Installation:
1. Please use cable connection for the
first time setup. Using the
RXS-4324 as example, please
connect an Ethernet cable to the
LAN socket located on the
camera’s rear and attach it to the
network.
2. Connect the attached power adapter
to the DC power jack of the
camera. Note: Use the power
adapter, 12VDC, included in the
package and connect it to wall
outlet for AC power.
3. Once you have installed the camera well and powered it on, the power LED will
turn on. It means the system is booting up successfully. Furthermore, if you have a
proper network connection, and access to the camera, the LED will flash blue
under wired mode.
- Ceiling Mount:
1. Fix the camera to L-type bracket with
the two supplied screw s
2. Fix the bracket and camera to the
ceiling using two wall anchors and
screws
5