Programming guide – Robertshaw 8601 User Manual

Page 7

Programming Guide

SETTING TIME OF DAY AND
DAY OF WEEK

1. Press SELECT until the cursor is

over SET CLOCK. Press SET. The
HOURS segment will be blinking.
Use the

button to adjust

the time. NOTE: The AM or PM
indicator will change as the
HOURS display rolls through a 24
hour cycle.

2. Press SET. The MINUTES segment will be blinking. Use the

button to adjust the MINUTES setting.

3. Press SET. The DAY segment will be blinking at the top of the

display. Use the

button to adjust the day of the week.

Press SET.

PROGRAMMING YOUR THERMOSTAT

The 8601 thermostat features 1-button programming. Simply follow these
steps to customize your thermostat for your lifestyle.

1. Place the HEAT-OFF-COOL switch into the

HEAT position. Make sure the cursor is in
the RUN/SET PROG position. Press SET.
The HOURS segment will be blinking.
MON thru FRI (the work week) will be dis-
played across the top. AM1 will be illuminated in the lower right
hand corner. You can now start programming the first event of the
work week.

2. Use the

button to adjust the hour of the first event. Press SET.

3. The MINUTES segment will be blinking. Use the

button to

adjust the minutes. Press SET.

4. The temperature should be blinking. Use the

button to

adjust the desired temperature of the first event. Press SET.

5. AM2 should now be displayed. Repeat

steps 2-4 to program the remaining events
(PM1 and PM2) for the work week. There
are a total of 4 events.

MON = MONDAY
TUE = TUESDAY
WED = WEDNESDAY
THU = THURSDAY
FRI

= FRIDAY

SAT = SATURDAY
SUN = SUNDAY

select

set

heat off cool

hold

vac

prog

run/set

hold

temp

clock

set

auto on

MON

select

set

hold

vac

prog

run/set

hold

temp

clock

set

o on

Cursor