Ryobi RY24600 - Manual (Page 9)

7 — English
ASSEMBLY
UNPACKING
This product requires assembly.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Power Head
Hedge Trimmer Attachment
Blade Cover
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ASSEMBLING THE TOOL
See Figure 2.

Insert the plug on the hedge trimmer attachment into the
opening on the power head. Make sure the plug is fully
seated.
 Slide the threaded collar onto the threaded base and turn
the collar clockwise. Tighten securely.
NOTE: Once assembled correctly, the upper and lower tubes
should not separate when pulled. Repeat above steps if
tubes can be separated.
WARNING:
Failure to secure the upper tube to the lower tube as
instructed above could result in serious injury or death.