Roberts Radio ecologic1 User Manual

Page 15

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Manual tuning - FM

1. Press

the

On/Off button to switch on your radio.

2. Press the Band button to select the FM band. Fully extend the

Telescopic aerial.

3. Press and release the Select button until the display shows "Manual

tune < >".

4. Press

either

the

Tuning Up or Down buttons to tune to a station.

The frequency will change in steps of 50kHz. Pressing and holding
one of the buttons will advance the frequency selection several times
each second.

5. When the end of the waveband is reached the radio will recommence

tuning from the opposite end of the waveband.

6. Adjust

the

Volume control to the required setting.

7. To cancel the Manual Tune option, press and release the Select button

again so that the display shows "Auto tune < >".