Roberts Radio SolarDAB Solar Powered DAB Radio User Manual

Page 13

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Finding new stations - manual tuning

Normally, you will use the auto tune feature as described above to ﬁ nd
new radio stations. Should you need to search for DAB radio stations at
a particular frequency, please use the following procedure.

1. Press and hold the Scan button. The display will list the scan options

available.

2. Rotate

the

Tuning control until "Band 3" or "L Band" is selected with

the arrow on the display, depending on which frequency band you wish
to tune to.

3. Press and release the Tuning control. The display will then offer

you a range of frequency blocks, named according to the DAB
speciﬁ cations

For Band 3, the frequency blocks are named 5A through 13F

For L Band, the frequency blocks are named LA through LW

4. Rotate

the

Tuning control until the desired frequency block is selected

with the arrow on the display.

5. Press and release the Tuning control to initiate a scan of the selected

frequency. If any new radio stations are found, then the reported number
of services will increase, and the new radio stations will be added to
the list stored in the radio.

After scanning, the radio will return to the radio station previously tuned.

If you are uncertain regarding the frequencies used for DAB radio in your
location, then select the "DAB (all)" option.

2-5