Ricoh PCI-to-PC Card Adapter - Manual (Page 2)

2
Remark:
PCI-to-PC Card Adapter (with driver CD-title bundled)
supports 32-bit CardBus and 16-bit PCMCIA PC Card
under Windows 98SE/ME/2000/XP
PCI-to-CardBus Adapter Single (no driver bundled)
supports 32-bit CardBus PC Card under Windows
98SE/ME/2000/XP and 16-bit PCMCIA PC Card under
Windows XP only
1-2 System Requirements
Pentium or equivalent PC computer with one available PCI slot
Windows 98SE/ME/2000/XP
2. Installation
2-1 Static Electricity Precaution
One of the routine precautions you must be aware of when working with
computer components is the problem of static electricity discharge.
Caution: Static Electricity Discharge may permanently damage your
system. To avoid possible static electricity discharge during the
installation, please follow the guidelines below:
Discharge any static electricity build up in your body by touching a
large grounded metal surface or the computer case (if plugged in),
for a few seconds.
During the installation, avoid any contact with internal parts.
2-2 Hardware Installation
General instructions for installing the card are provided below, since the
design of computer cases and motherboards vary. Refer to your computer’s