Rogue Audio M-120 User Manual

Page 14

OWNER AND WARRANTY REGISTRATION FORM

Included with this manual is an Owner and Warranty Registration Form.
Please take a minute to fill out this card and return it to Rogue Audio.

SPECIFICATIONS

output power

120 WPC

frequency response

5Hz - 50 kHz + 3dB

THD <

0.1%

input sensitivity

1.0 V RMS

dimensions

18 ¼” W x 15 ¾” D x 7” H

weight 42

Lbs

power requirements

115/230V - 50/60Hz

INTRODUCTION

Congratulations on your purchase decision! We at Rogue Audio truly
believe that our amplifiers provide the “smartest” value in high-end
audio. If you have never owned a vacuum tube amplifier you will be
thrilled by the silky-smooth sound and incredible detail that only a
tube amplifier can provide. And with your Rogue Audio amplifier,
you can be sure that you are getting the very best in tube
amplification. We at Rogue Audio are extremely proud of our
products and want you to enjoy them to their fullest potential. So
please, take the time to read through this short manual so that you can
be confident that you have set up your amplifier properly

SETTING UP YOUR POWER AMPLIFIER

tools required:

phillips head screwdriver and a clean glove or cloth.

WARNING - This amplifier uses voltages that could cause
injury or death. Never open the amplifier while it is
plugged in, and always wait at least one hour after turning
the unit off to unplug and open the unit. Lethal voltages
can remain in the electronics after the unit is unplugged.

1) Opening the box - Carefully remove the amplifier from the box.

It is important that you retain the packing material and box in the
event that the amplifier ever needs servicing. The packing
material and box have been carefully designed to protect your
valuable equipment during shipping so you don’t want to throw
them away!

Rogue M-120 Owners Manual