Runco CINEMAWALL CW-61 - Manual (Page 51)

Operation
Runco CinemaWall Owner’s Operating Manual 41
PRE
L
IMINAR
Y
Signal Info Select Signal Info from the Main menu to check the frequencies and polarities of the
current input signal. (If RGB/PC is the current input, “MODE” is replaced by “MEMORY.”)
Press EXIT ( ) to return to the Main menu.
H. FREQ : 48.4KHz
V. FREQ : 60.0Hz
H. POLARITY : NEG.
V. POLARITY : POS.
MODE : 480i
RESOLUTION : --
SIGNAL INFO
SEL. SEL. OK OK RETURN EXIT