Ryobi P715 - Manual (Page 4)

4
SyMbOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SyMbOL NAME dESigNATiON/EXPLANATiON
V Volts Voltage
A Amperes Current
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand operator’s
manual before using this product.
Safety Alert Precautions that involve your safety.
Hot Surfaces
To reduce the risk of injury or damage, avoid contact with any hot
surface.
SAvE ThESE iNSTRUCTiONS
WARNiNg:
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely
the Operator’s Manual. If you do not understand the warnings and instructions in the Operator’s Manual, do not use
this product. Call Customer Service for assistance.
The following signal words and meanings are intended to explain the levels of risk associated with this product.
dANgER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNiNg:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
CAUTiON:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
CAUTiON:
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SyMbOL SigNAL MEANiNg