Ranger RCI-5054DX - Manual (Page 2)

- 2 -
Chapter 1 Specifications
GENERAL
Model RCI-5054DX
Frequency Range :
50.000 ~ 54.000 MHz
Tuning Steps 100 Hz, 1 KHz, 10 KHz, 100 KHz, 1 MHz
Emission USB, LSB, CW, AM, FM
Frequency Control Phase-Lock-Loop Synthesizer
Frequency Tolerance 0.005%
Frequency Stability 0.001%
Operating Temperature
Range
-10 O C to +50 O C
Antenna Impedance 50 ohm
Microphone Plug-In (6-Pin), 400 Ω Dynamic PTT
Meter Function RF Output, RX Receive Signal Strength, SWR
Input Voltage 13.8 V DC
Dimensions 7 3/4" (W) x 10 3/4" (L) x 2 3/8" (H)
Weight 4 lb. 3 oz.
TRANSMITTER
RF Power Output 25W PEP (USB/LSB)
10W RMS (CW/AM/FM)
RF Transmit Modes USB, LSB, CW, AM, FM
Antenna Connector UHF Type, 50 Ω
Modulation 16F3, A3E, J3E, A1A
Spurious Emissions -50 dB
Carrier Suppression -50 dB
RECEIVER
Sensitivity AM/CW : 0.5 uV for 10dB Sinad
FM : 0.25uV for 12dB Sinad
USB/LSB : 0.15uV for 10dB Sinad
Image Rejection Ratio -65 dB
AGC Figure of Merit SSB/CW/AM : 80dB at 50mV for a 10dB change in
Audio Output
Audio Power Output 2.5W
( SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE )
- 3 -
Chapter 2 Introduction
Congratulations on your purchase of an RCI-5054DX 6 meter
amateur radio. Your RCI-5054DX is designed to provide trouble-
free service and state-of-the-art communications in the 6 meter
band. Please read this manual thoroughly to ensure proper
performance.
Unpacking
The following items are included with our RCI-5054DX. Carefully
remove and examine all materials from the packing carton. If any
items are missing or appear damaged, please contact your dealer
immediately. Each unit should include:
(1) RCI-5054DX Transceiver
(2) Dynamic Microphone with remote frequency adjustment
switches
(3) Power Cord
(4) Mounting Bracket & Hardware
(5) Installation Hardware
(6) Owner's Manual
(7) Warranty Registration Card
It is recommended that you save the packing materials for future
storage or shipping.
IMPORTANT
To operate this radio, you must possess and amateur radio
operator's license issued by the FCC. Operation of this unit without
proper licensing is ILLEGAL and can result in severe penalties.