Roberts Radio cr9980 - Manual (Page 8)

8
Setting the time and date
Note: When the unit is set to CD mode or radio you cannot set the time
and date.
1. Press and hold the Time Set button for 2 seconds.
2. The clock display will change to show the time setting icon and
the minutes will flash.
3. Press the Tuning Up and Tuning Down buttons to increase or
decrease the minutes.
Note: For rapid time adjustment, press and hold the Tuning Up or Tuning
Down buttons.
4. Press the Time Set button again. The hour will flash in the clock
display.
5. Press the Tuning Up and Tuning Down buttons to increase or
decrease the hour. The clock uses a 12 hour display with an AM and
PM indicator. Ensure that the correct 12 hour cycle is selected.
6. Press the Time Set button a third time. The day will flash in the clock
display.
7. Press the Tuning Up and Tuning Down buttons to increase or
decrease the day.
1
3
3
4
5
5
6
7
7
cr9980 instruction book1.PMD 1/14/2005, 12:36 PM 8